You need to take good care of them for your fiber optic cables or SFTP trunk cable to last for long and function efficiently.
Handling cables of fiber optic
On how they function and last, how you handle the cables has a great impact. From getting into contact with all surfaces, one of the things that you should do is protect the exposed fiber end. From getting scratched, this is to prevent the chip at the end of the cable when with the hard surfaces it gets into contact. Also, with your finger, avoid touching the exposed fiber to avoid leaving an oil residue.
From resulting in micro-beads and undergoing excess attenuation, this is to prevent the cables or CAT6A trunk cable. To help you out, Ask a professional if you don't know how tight is tight.
When making changes or during installation, it's common for you to pull the cable. The strain relief is used when pulling the cable always. To prevent the glass from breaking, you should never pull on the cable directly.
It's always suggested that the cable must be inspected regularly for defects. While the cable is still connected to the laser source and while looking directly into the fiber end when doing the inspection avoid doing it. Eye damages can be avoided. Ensure that the fiber is disconnected from the laser source before you do the inspection.
Cleaning of Fiber optic cable
To keep them working effectively is to regularly clean them, one of the most important things that you should do to your cables and field assembly connector. For cleaning the cables, there are many ways: you can use lens paper, isopropyl alcohol, or compressed air. Also, with your finger, avoid touching the exposed fiber to avoid leaving an oil residue. Ensure that the cable doesn't get into contact with your surface and fingers when doing the cleaning. Also, ensure that as bending causes internal breaks you don't bend the cable. This prevents contamination.
No comments:
Post a Comment