Meaning of UTP, S/UTP, FTP, STP, and CAT7

Selecting the right type of shielding you want the cable to have can prove a minefield of confusing acronyms when the question is about copper cabling.

U/FTP: UNSHIELDED WITH FOILED TWISTED PAIRS

Overall shielding is not provided by CAT7 trunk cable but the individual twisted pairs are wrapped in a foil screen. It then provides some protection from EMI and crosstalk from adjacent pairs and other cables.

F/UTP: FOILED WITH UNSHIELDED TWISTED PAIRS

Often referred to as FT. Overall foil shield wrapped around unshielded twisted pairs and a drain wire are listed out by this type of cable list. Unwanted noise is redirected to the ground when the drain wire is correctly connected, offering extra protection against EMI/RFI.

S/UTP: SHIELDED WITH UNSHIELDED TWISTED PAIRS

This cable is often referred to as ST. However, you have to use this term with caution as other shielded cables use this term. Compared to U/UTP, across long distances, SFTP trunk cable is quite capable of supporting higher transmission rates, and because of the braids; it gives better mechanical strength and grounding.

U/UTP: UNSHIELDED TWISTED PAIRS

It is also referred to as UTP. To date, it is the most common and basic method of cable construction, which consists of pairs of wires that are twisted together. There is no shielding provided; instead, a balanced transmission line is created by the symmetrical twist in the wires which then helps in reducing electrical noise and EMI.

S/FTP: SHIELDED WITH FOILED TWISTED PAIRS

Similar to F/FTP, before being wrapped in an overall flexible yet mechanically strong braid screens the individual twisted pairs are wrapped in foil tape. With adjacent pairs and other cables, the additional foil on the twisted pairs helps to reduce crosstalk.

F/FTP: FOILED WITH FOILED TWISTED PAIRS

These are quite similar to F/UTP cables. The designing of cable construction is done in a way that it can produce the assembly with greater protection from other cables.

SF/FTP: SHIELDED AND THEN FOILED WITH THE HELP OF FOILED TWISTED PAIRS

SFTP copper cable consists of both an overall braid shield and foil shield, with individually foil tape screened twisted pairs. From interference and better grounding due to the braid, this type of cable provides the best level of protection.